Intumescent ul 1709. High Rise Hydro-carbon fire test criteria.

Intumescent ul 1709 Chartek Application Training October BilcoArmor® our new protection high performance intumescent paint. The product is a high build, solvent free, two pack material providing ex Pitt-Char XP epoxy intumescent coating offers outstanding fire protective properties. 263 or BS 476 certifier test norms. UL 1709 measures a material’s performance in a “rapid-temperature-rise fire Environmental protection UL 2431 Category I-A NORSOK M501 System 5A Rev. Chartek® 1709 Epoxy Intumescent PRODUCT DESCRIPTION Chartek 1709 is a high performance epoxy intumescent fire protection coating system. • VOC compliant Intumescent paints are applied on materials to protect them against fire, but the development of novel chemistries has reached some limits. In addition, the model equations are derived into a new coordinate system by introducing the expansion effect into เอกสารข้อมูลเทคนิค Jotachar 1709 องค์ประกอบแต่ละส่วนจะต้องถูกเก็บแยกกันไว้ที อุณหภูมิ 25-30 องศาเซลเซียส (77-86 องศาฟาเรนไฮต์) เป็นเวลา 12 ชั วโมง คน/ผสมให้. Nullifire® S605 is listed by UL and ULC for the following designs: Wide Flange Columns: X629 Tube Columns: X630 Pipe Columns: X631 Restrained and Unrestrained Beams: N609 Beams (Protected Deck): D784 Beams (Unprotected Deck): D935 UL 1709: XR623 It said FIRETEX M90/03 passive fire protection “is an intumescent coating that meets UL 1709 testing requirements for onshore passive hydrocarbon fire protection, while also permitting stakeholders to apply variable material thicknesses to different sized steel sections”. -- This is a two component solvent free amine cured 100% solids epoxy intumescent coating. Specification tested by FM Approvales hydrocarbon assets in demanding environments. Having covered millions of square meters over a period of 10 Various products are used to protect the steelwork such as boards, cementitious or fibrous sprays and intumescent coatings. carboline. 5, 6, 38 Another is the furnace from the Hempel Found Coatings Science and Technology Centre (CoaST) at DTU, Denmark, to expose a sample to 1093°C within 5 min according to the UL 1709 hydrocarbon fire standard. Having covered millions of square meters over Results of furnace experiments, conducted under a standard hydrocarbon fire curve (UL1709), showed that a formulation containing 15 wt. Fire Resistance Ratings - ANSI/UL 1709 See General Information for Fire Resistance Ratings- ANSI/UL 1709 Design No. Fireproofing Vermiculite Intumescent In total, tests were performed on 56 intumescent coating protected steel specimens, of which 16 specimens were applied with type-U intumescent coating and the other 40 with type-A intumescent coating. Part of our UL 1709 product offer, boron-free Chartek 1709 provides long term corrosion and fire protection in a single system. High Rise Hydro-carbon fire test criteria. Protective Coatings 32 Chartek 7 Protecting lives, protecting assets UL 1709. Coating C was a silicone-based coating designed by our team, as described in Reference The resultant coating exhibited low heat conductivity and good cohesion, imparting effective fire protection in accordance with the UL 1709 fire scenario [32,33]. Compared to other intumescent coatings that only meet UL 1709 requirements when applying a universal coating thickness to an entire asset, FIRETEX M90/03 has been tested and approved for application at variable dry film thicknesses (DFTs) for different pieces of steel used on an asset. For the protection of steel structures, pipework and vessels from the effects of hydrocarbon pool fires. Tested and certified in accordance with the UL 1709 Thermo-Lag 3000-SP has been extensively and independently tested in accordance with: UL 1709, UL 2431 Category I-A, ISO 834-3, IMO FTP Code (IMO A. *** 3. Each UL CCN provides a direct link to the Guide Information for the product category. this guide is the UL product category code designation. An epoxy intumescent coating, Hempafire XTR 100 insulates steel during a hydrocarbon pool fire, extending the steel’s load-bearing capacity This is a two component solvent free amine cured 100 % solids epoxy intumescent coating. It is designed to protect against Chartek 1709 is a high performance epoxy intumescent fire protection coating system. No additional reinforcing mesh is required. The product is a high build, two pack material providing excellent durability and combined corrosion and fire protection. Application with thickness as per UL. % zinc borate gave the best performance. DESCRIPTION The product is a high build, two pack material providing excellent durability and combined corrosion and fire protection. It has resistance to moisture, acid spillage, alkali spillage A comprehensive data source for the range of high quality International by AkzoNobel intumescent paint coatings - product brochures, safety data sheets, specification guides and more. Firestops. This Underwriter’s Laboratories Intumescent paints and coatings provide another option for fireproofing equipment. It combines the desired properties of a fireproofing and that of a high-performance protective coating. UL 1709 See Design Listing CC/IF 120-01 UL 1709 Environmental Exposures Pyroclad X1 has been evaluated for use in exterior and interior environmental conditions as described in UL 1709 Appendix A and listed in the table below. 4Mpa) • NORSOK M501 System 5 Ideal In this work, we propose a laboratory-scale furnace for coating evaluation, which can simulate the conditions of a typical hydrocarbon fire curve, that is, the standard UL 1709. Fire Resistance Ul 1709 December 2019 51. 5. Further, to provide effective fire protection, intumescent coatings must be durable and intact when exposed Chartek 1709 is a high performance epoxy intumescent fire protection coating system. Suitable for the protection of steel, aluminum and other substrates from hydrocarbon Chartek 1709 is a boron free epoxy intumescent fire protection solution. UL 1709 – “Rapid Rise Fire Tests of Protection Materials for Structural Steel”. Exposure Description Condition Applicable Design Listing Accelerated Aging CC/IF 120-01 High Humidity CC/IF 120-01 Tough and durable, Chartek 1709 can be applied at temperatures as high as 121ºC (249. The product is a high build, two pack material providing excellent durability and Chartek 1709 is a high performance, high build, solvent free, epoxy intumescent fireproofing coating. 401 Berlin Street East Berlin, CT 06023 USA (860) 828-0571 (UL) • UL 1709 Rapid Rise Fire Test of Protection Materials for Structural Steel • UL Fire Resistance Directory FIRE RATINGS UL 263 (exterior listed) UL 1709 Design XR627 ASTM E-119 USA AS 1530. • UL 1709 rated. A list of fire protection for structural steelwork product categories evaluated by UL, along with the applicable standard(s), can be found in Appendix A. 1709 Chartek 1620CSP Hydrocarbon PFP Chartek 7 Interkote Chartek 2218 Chartek 1709 Chartek 1620CSP Chartek 8E Chartek 7E 2015. hydrocarbon assets in demanding environments. With an in-service track record of over Chartek 1709 adds unique capabilities to our ANSI/UL 1709 listed product offer to give you an unrivaled choice. UL 1709), is typically conducted using industrial Typhoon Tap-On intumescent bolt caps provide fire protection for up to 120 mins for bolted connections in structural steel frames. Other UL 1709-certified coatings may have only been tested Intumescent paints are applied on materials to protect them against fire, but the development of novel chemistries has reached some limits. The column UL 1709. These materials can be applied in form of boards, spray, coating, and encasing depending on the site requirements. CAFCO ® SprayFilm ® WB 3 / ISOLATEK ® Type WB 3; CAFCO SprayFilm WB 4 / ISOLATEK Type WB 4; CAFCO SprayFilm WB 5 / Thermo-Lag 3000-P has been extensively and independently tested in accordance with: UL 1709, UL 2431 Category I-A, ISO 834-3, IMO FTP Code (IMO A. 7 Chartek 1709 is a two pack epoxy intumescent coating that offers long term corrosion and pool fire protection for the onshore oil and gas industry. 2150 Schuetz Road. Tags It is designed to protect against hydrocarbon fire scenarios for up to four hours as defined in the ANSI/UL 1709 standard. Get in touch. Need Help With Fireproofing? We Are Experts! Intumescent paints are applied on materials to protect them against fire, but the development of novel chemistries has reached some limits. 4 Australia KS F2257 Korea Interchar® 212 is undergoing continual testing and approvals. For the most current UL designs, please visit the UL Product iQ page Intumescent Coatings. The Bunsen burner test is a laboratory-scale flame test adapted to mimic closely the bench scale UL-1709 test for evaluation of heat shielding capacity of intumescing coated steel plates against hydrocarbon fire. (See Item 3) 1. In this work, the effects of ammonium polyphosphate (APP), melamine (MEL), TiO 2, CaCO 3, and vitreous silicate fiber, were investigated on the fire-resistance performance of selected zinc borate (ZB)-containing and ZB-free hydrocarbon intumescent coatings with exposure to the hydrocarbon fire testing curve UL 1709. UL 1709). O. ISO 834) and hydrocarbon fire (e. The product is a high build, two pack material providing excellent durability and combined corrosion, fire and cryogenic protection. cryogenic protection. The mechanical strength of the intumescent coating was further improved by inclusion of silicate particles to a silicone binder with EG [34]. Pyroclad; Applications. See tables The furnace was mostly used for hydrocarbon fires according to UL 1709 [26] but is mentioned to be also suitable for cellulosic fire tests [61,62]. The furnace chamber has a volume of 26 dm 3 and CHARREX 1709 is a high performance epoxy intumescent fire protection coating system. Jotachar 1709 memenuhi standar ketat ANSI/UL 1709, menjadikannya pilihan terbaik untuk melindungi infrastruktur penting Products have been tested for UL 1709 (hydrocarbon), BS 476, Read More. So, one of the important features of this model is to give the insight of the radiative heat transfer in intumescent coating during expansion. 81mm (306 mils)**. Skip to content. UL 1709, “Rapid Rise Fire Tests of Protection Materials for Structural Steel” is the hydrocarbon fireproofing testing standard usually referenced and recognized Chartek 7 is a high performance, widely certified epoxy intumescent fire protection solution. UL Red Line Edition 6 Published Date: July 08, 2024 ANSI Approved: July 08, 2024. Steel Column — Min. Specially designed as an intumescent coating to provide fire protection for steel in hydrocarbon pool fires for different types of structures and equipment. Our Pyroclad and Thermo-Lag brands provide rugged, dependable solutions for Chartek 1709 is a high performance epoxy intumescent fire protection coating system. It should be noted that there is a more stringent classification for fire-resistive coatings under ANSI/UL 1709, “Rapid Rise Fire Tests of Protection Materials for Structural Steel. Fire Duration (minutes) 120. They can exceed ANSI/API 607 and UL 1709. Fire Resistant Materials tested to UL 1709 standard. Available in a 20kg unit. Chartek 7 is a high performance, widely certified epoxy intumescent fire protection solution. AS 1530. Other UL 1709-certified coatings may have only been tested Chartek 1709 is a high performance epoxy intumescent fire protection coating system. FIRETEX ® M90/03. CHARREX 1709 is a high performance epoxy intumescent fire protection coating system. It is a heavy duty intumescent coating for interior applications used to effectively prevent flame spread. Google Scholar Part of International's UL 1709 product offer, boron-free Chartek 1709 provides long term corrosion and fire protection in a single system. 4 lb. As suggested by UL 1709, small scale testing for assessment of fire protective coatings possible by using steel samples with the thickness of Chartek 1709 is a high performance epoxy intumescent fire protection coating system. ASTM E84 (UL 723) is a test method that measures surface burning characteristics, aka flame spread in an active fire and smoke development. Intumescent Fireproofing: Spec ID: 29501: Design Documents. Chartek 1709 is a high performance epoxy intumescent fire protection coating system. When fire occurs, the coating will as per UL 1709 hydrocarbon temperature curve. The most common fire standard for equipment fire protection in the oil, gas and petrochemical industry is UL 1709. Materials include lightweight insulation board, blanket wraps, thin film intumescent coatings as well as traditional spray and trowel applied material. This standard aims specifically at protective materials for structural steel. Product advantages. Tested and certified to the highest standards, Interchar 2060 offers rapid drying times for fast handling and throughput. Intumescent coating is effective in protecting against fire through basic thermodynamic principles and can provide superior protection and convenience. Field Applied Thin-Film Intumescent Fire-Resistive Materials”. Fully certified and tested Chartek 1709 also has the following approvals: • Underwriters Laboratories (UL) ANSI/UL 1709 • Factory Mutual (FM) • Blast resistant up to 4 bar overpressure (0. The use of Flame Control No. Troy Marshall, Fire Director – The Americas, Sherwin-Williams Hydrocarbon fire test standards like UL 1709 or NFPA 290 mimic a more intense, rapidly heating fire with hydrocarbons as the primary fuel source. ASTM D2240 “Test Method for Rubber Property -Durometer Hardness” (Shore D scale Industrial fire testing of intumescent coatings employs standard fires with a preset temperature-time relationship. A UL 1709 standard tested design for protection to valuable assets and infrastructure in the petrochemical hydrocarbon industries. 50-44 requires proper ventilation during application and drying to CHARREX 1709 is a high performance epoxy intumescent fire protection coating system. The product is a high build, (UL) ANSI/UL 1709. Boron-free Chartek 1709 provides long term corrosion and fire protection in a single system, having covered millions of square meters over a Providing systems tested to ASTM E119 and UL 1709 standards for interior and exterior fireproofing of structural steel, decking and storage vessels. CC/IF 120-01: FIRETEX M90/03 Epoxy Intumescent Coating provides durable fire and high-performance corrosion protection with minimal to UL 1709 certified for up to four hours of protection • UL 2431, 1-A heavy industrial outdoor • Tested to ISO 20088 for cryogenic spill exposures • Trowel, single-leg airless or plural component UL 263 (exterior listed) UL 1709 Design XR627 ASTM E-119 USA AS 1530. , Northbrook, IL . Test results for commercial coatings are easily available from literature or from intumescent coating manufactures. Need Help With Fireproofing? We Are Experts! Chartek 1709 is a high performance epoxy intumescent fire protection coating system. ICBO ES Reports 2. Suitable for the protection of steel, aluminum and other substrates from hydrocarbon and cellulosic fires. When exposed to flame, the material volatilizes at fixed temperatures, exhibits a Intumescent coatings employ the heat barrier effect of an expanded char in the fire protection of the underlying substrates. DESCRIPTION The product is a high build, two pack material providing excellent durability and combined corrosion and Tested in accordance with ANSI UL 1709, BS476:476-20/21 (Part 20 Appendix D), ISO TR834-3(1994), ISO 834:1975, ISO 22899-1:2007, Jotachar 1709 is a mesh-free application epoxy passive fire protection material for hydrocarbon pool & jet fires in the hydrocarbon processing industry. Low Carboline’s complete line of commercial and industrial fireproofing products offers a level of unparalleled performance in several markets. January 2016. Pyrocrete 40 has no › UL 1709 Rapid Rise Hydrocarbon Fire › BS 476 Hydrocarbon Pool Fire › ISO 834 Hydrocarbon Pool Fire › ISO 22899-1 Jet Fire Carboline’s industrial intumescent products provide a superior level of fire protection for both land based and offshore projects. UL 1709 Standard for Rapid Rise Fire Tests of Protection Materials for Structural Steel 2. Oil And Gas Industry. Certified for structural fire protection on carbon and galvanised steel. As part of UL2431, UL 1709 Edition 5 includes the same tests, in addition to new durability tests including: • Combining High Humidity and This work explores the importance of varying the ratio of conventional flame-retardant additives and the scale of testing on the thermal and flammability/fire performance of acrylic-based coatings. Intumescent paints are easy to apply, nice to look at, and can stop a fire in its tracks. CARBOLINE COMPANY. The product is a high build, two pack material providing excellent durability and combined corrosion and UL 1709, BS476:476-20/21 (Part 20 Appendix D), ISO TR834-3(1994), ISO 834:1975, ISO 22899- Hydrocarbon fire test standards like UL 1709 or NFPA 290 mimic a more intense, rapidly heating fire with hydrocarbons as the primary fuel source. We do all types of fireproofing for the Downstream, petrochemical industry and we coordinate it, giving you a single point of responsibility for all shop-applied and field fireproofing. Approvals yas Hotel, Abu Dhabi, UAE This is a two component solvent free amine cured 100% solids epoxy intumescent coating. www. Y615 - Fire-resistance Ratings - ANSI/UL 263 D e s i g n /S y s t e m /C o n s t r u c t i o n /A s s e m b l y U s a g e D i s c l a i m e r Intumescent Fir e-resistive Mater ials* — Coating spray or brush applied directly from containers to desired thickness. Some of these materials have reactive properties which provide an FIRETEX M90/03 passive fire protection is an intumescent coating that meets UL 1709 testing requirements for onshore passive hydrocarbon fire protection, while also permitting stakeholders to apply variable material FIRETEX M90/03 passive fire protection is an intumescent coating that meets UL 1709 testing requirements for onshore passive hydrocarbon fire protection, while also permitting stakeholders to apply variable material Chartek 1709 is a boron free epoxy intumescent fire protection solution. When fire occurs, the coating will rapidly intumesce to form a foam char layer that prevents fire propagation. Products have been tested for UL 1709 (hydrocarbon), BS 476, Read More. Depending on the source of “fuel”, most of the standard fires are classified into two types: cellulosic fire (e. Further, to provide effective fire protection, intumescent coatings must be durable and intact when exposed Jotachar 1709 Product description This is a two component solvent free amine cured 100 % solids epoxy intumescent coating. This article about how intumescent paint works and some of the industry ratings you’ll need to know if you’re thinking of using intumescent paints on your structure. ANSI/UL 1709 tested and Listed by Underwriters Laboratories (UL) for fire durations from 60 Intumescent coating - Flexible jacket - Steel enclosure - Intumescent board FIREPROOFING FR Coating FR Jacket FR Steel Enclosure Hydrocarbon Fire Tests are known as UL/ANSI 1709, BS 476 Part 20 and others. FIRETEX M90/03, a UL 1709-certified, highly reinforced, 100% solids epoxy intumescent from Sherwin-Williams, helps owners reduce total risk through fire protection for up to four hours and decrease maintenance costs over the lifetime of assets through corrosion protection. PPG PITT-CHAR NX is our trusted flexible epoxy intumescent Passive Fire Protection (PFP) coating system designed to resist severe hazards such as cryogenic spills, hydrocarbon pool fires, jet fires and UL 1709 Edition 5 two-hour fire rating, PITT-CHAR NX is only 7. Applied directly to equipment in manufacturer or vendor facilities, these coatings require extra FIRETEX M90/03 passive fire protection is an intumescent coating that meets UL 1709 testing requirements for onshore passive hydrocarbon fire protection, while also permitting This is a two component solvent free amine cured epoxy intumescent coating. CAFCO 300 Series & CAFCO 400 Series / ISOLATEK Type 300 Series & ISOLATEK Type 400 Series A comprehensive data source for the range of high quality International by AkzoNobel intumescent paint coatings - product brochures, safety data sheets, specification guides and more. /yd2 galvanized metal lath is typically utilized for most UL 1709 designs. Product chemistry - Epoxy Intumescent; Volume solids - 100%; VOC content (EPA method) - 10 g/lt; Colour options - Medium grey; Number of components - Multi pack; Attributes - Solvent free; Chartek 1709 Compared to other intumescent coatings that only meet UL 1709 requirements when applying a universal coating thickness to an entire asset, FIRETEX M90/03 has been tested and approved for application at variable dry film thicknesses (DFTs) for different pieces of steel used on an asset. Fire protection Services: Training programs This is a two component solvent free amine cured 100% solids epoxy intumescent coating. The large scale tests however, are The intumescent coating properties were tested under the influence of the most severe fire conditions that possibly may occur during a real fire resulting from high-pressure releases of flammable gas. Applied directly to equipment in manufacturer or vendor facilities, these coatings l Only products which bear UL's Mark are considered as Classified, Listed, or Recognized. • Thin film coating – offers an economical solution to alternative fireproofing. The most efficient 60 minute waterborne intumescent coating used for the protection of structural steel against cellulosic fires. UL263. Jotachar 1709’s continuous application process ensures excellent ANSI/UL 1709 tested and Listed by Underwriters Laboratories (UL) for fire durations from 60 minutes to 240 minutes use Typically used in the oil, gas and energy industries. (UL 1709 ), and jet fire (ISO 22899-1 ) were conducted Compared to other intumescent coatings that only meet UL 1709 requirements when applying a universal coating thickness to an entire asset, FIRETEX M90/03 has been tested and approved for application at variable dry film thicknesses (DFTs) for different pieces of steel used on an asset. Standard for Rapid Rise Fire Tests of Protection Materials for Structural Steel, Underwriters Laboratory Inc. Read More. 7. UL 1709), is typically conducted using industrial using innovative intumescent technology. Specifications Color : White Finish : Density: Viscosity: pH: VOC: Typical thickness: Solid content: Storage temp: It is designed to protect against hydrocarbon fire scenarios for up to four hours as defined in the ANSI/UL 1709 standard. Lowest thickness per fire rating of Compared to other intumescent coatings that only meet UL 1709 requirements when applying a universal coating thickness to an entire asset, FIRETEX M90/03 has been tested and approved for application at variable dry film thicknesses (DFTs) for different pieces of steel used on an asset. Specifications Color : White Finish : Density: Viscosity: pH: VOC: Typical thickness: Solid content: Storage temp: Typhoon Tap-On intumescent bolt caps provide fire protection for up to 120 mins for bolted connections in structural steel frames. THERMO-LAG 3000 is a two component, thermally activated, intumescent epoxy coating. 240. Chartek 1709 is a high performance, high build, solvent free, epoxy intumescent fireproofing coating. Contact Carboline Technical Service for further information. refining facilities, LNG facilities, nuclear and conventional power plants, cementitious vermiculite or Intumescent UL 1709-certified to deliver up to 4 hours and 30 minutes fire protection at low dry film thicknesses, it improves safety and reduces your overall project costs. These coatings weigh much less than the other two methods and are the latest technology for fireproofing steel supports. Scope Back to Standard 1709, Edition 6 “With FIRETEX M90/03 epoxy intumescent coating being the first product to optimize the UL 1709 Revision 5 specification and the application characteristics of intumescent coatings for hydrocarbon fire protection, we are further helping stakeholders to contain material and labor costs while achieving their desired fire protection rating,” said Carl Burrell, global Some only do epoxy intumescent, cementitious PFP or concrete. Approvals yas Hotel, Abu Dhabi, UAE UL 1709 Rapid Rise Fire Tests of Protection Materials for Structural Steel. A lightweight UL 1709-certified hydrocarbon passive fire protection coating with low dry film thicknesses Product description Hempafire XTR 100 is a lightweight, two-component, epoxy-based intumescent coating that provides up to 4 hours UL-certified fire protection against hydrocarbon pool fires. Rev. Fireproofing for hydrocarbon fire is commonly referred to as petrochemical environments fireproofing with UL 1709 test standards. BXUV - Fire Resistance Ratings - ANSI/UL 263 Cer tified for United States BXUV7 - Fire Resistance Ratings - CAN/ULC-S101 Cer tified for Canada See General Information for Fire-resistance Ratings - ANSI/UL 263 Certified for United States Design Criteria and Allowable Variances Intumescent coatings are applied in a paint-like manner. Includes fire-rated mortars, joint sealants and intumescent cable coatings. An exterior durable coating tested and approved for both pool and jet fire situations, Firetex® M90/02 provides passive hydrocarbon fire protection for up to four hours on structural steel, decks and bulkheads. These test standards attempt to simulate fire exposures in refineries, chemical processing facilities, or offshore oil platforms. The standards that address durability and weatherability include NORSOK M-501, which governs surface preparation and protective coating, and UL 1709, which determines a coated steel section’s durability performance. g. Having covered millions of square meters over a period of 10 Thermo-Lag 3000-P has been extensively and independently tested in accordance with: UL 1709, UL 2431 Category I-A, ISO 834-3, IMO FTP Code (IMO A. According to the company, its FIRETEX M90/03 passive fire protection is an Get vermiculite fireproofing coating or intumescent fireproofing paint for steel structure in India from JPSC Solutions. Other UL 1709-certified coatings may have only been tested Our cementitious and intumescent system have been tested by UL 1709 standard to project your investment from fire for up to four hours. In time, these environmental requirements Mastic and Intumescent Coating — (CAVNC). When exposed to fire, its unique chemical composition transforms its (UL 263 and UL 1709 test criteria) Pitt-Char XP Coating passed the following tests • Salt spray • Industrial atmosphere (CO2-SO2 air mixture) The US standard for assessing intumescent coatings under hydrocarbon fire conditions is UL 1709 [26]. Intumescent coatings also contain ammonium polyphosphate, which is a highly effective corrosion inhibitor. (SFRMs) and intumescent fire resistive materials (IFRMs). ANSI/UL 2431, the Standard for Durability of Fire-Resistive Coatings and Materials, is used to evaluate the protective coating against the long-term effects of environmental exposure, often a critical factor in the performance of Interchar 1120HY is a low VOC acrylic intumescent material independently fire tested for up to 3 hour fire ratings in accordance with ASTM E119/UL263. com. Other UL 1709-certified coatings may have only been tested Primed steel must meet minimum UL bond strength criteria. It is designed to protect against hydrocarbon fire scenarios for up to four hours as defined in the ANSI/UL 1709 standard. Our ability to execute all of these duties ensures that your project will proceed in the most UL 1709, and will also be a requirement of UL’s new hydrocarbon certification program. 6. Rapid installation reducing floor occupation times when compared to spraying connections; The resultant coating exhibited low heat conductivity and good cohesion, imparting effective fire protection in accordance with the UL 1709 fire scenario [32,33]. Jotachar 1709 is a mesh-free application epoxy passive fire protection material for hydrocarbon pool & jet fires in the hydrocarbon processing industry. Intumescent Paint. At the other end of the spectrum, dis- Furthermore, all intumescent-type materials certified by UL for use in fire-resistive assemblies have been sub-jected to adverse conditions to It is designed to protect against hydrocarbon fire scenarios for up to four hours as defined in the ANSI/UL 1709 standard. Minimal space is required. Usage For use in the onshore oil, gas, petrochemical and power generation industries. 150. (UL) ANSI/UL 1709 and provides durable low weight protection against pool fires which also deliver real lifecycle cost savings by reducing on-going maintenance. The fire-resistance performance evaluation of a hydrocarbon intumescent coating, according to standard hydrocarbon fire test methods (e. A two-component, solvent-free, thick-film epoxy intumescent coating. Boron-free Chartek 1709 provides long term corrosion and fire protection in a single system, having covered millions of square meters over a About the UL 1709 Standard. Testing for resistance to hydrocarbon fires follows ANSI/UL 1709, “Fire Tests of BXUV. In order to achieve UL 1709 Edition 4 certification, the exposed sample was required to test within a 25% deviation of an unexposed sample’s fire performance. Thermo-Lag 3000-P has been extensively and independently tested in accordance with: UL 1709, UL 2431 Category I-A, ISO 834-3, IMO FTP Code (IMO A. THE FIRST LIFESAVING STEP: HYDROCARBON PASSIVE FIRE PROTECTION. 2 - 5 mm) and hydrocarbon intumescent coatings (typically epoxy-based with dry film thickness of 2 - 40 mm). With various types of intumescent and cementitious technologies designed for industrial or architectural applications, we In this study, a new model for intumescent coatings is developed including the radiation transfer equation. 180. 8ºF), combining fire and corrosion protection with lifecycle cost savings. 60. 754(18) for H-0, H-60 & H-120 Divisions, ASTM E84, ASTM E119, ISO 20340, NORSOK M-501 5A Fire and Corrosion Testing, and NFPA 290 (extended to 150 minutes). ASTM E84 – “Test Method for Surface Burning Characteristics of Building Materials”. Nullifire® S605 is listed by UL and ULC for the following designs: Wide Flange Columns: X629 Tube Columns: X630 Pipe Columns: X631 Restrained and Unrestrained Beams: N609 Beams (Protected Deck): D784 Beams (Unprotected Deck): D935 UL 1709: XR623 using innovative intumescent technology. The terms “fire retardant” and “fire resistance” are defined terms in ASTM E176, Standard Terminology of Fire Standards and in ISO13943, Fire safety – Vocabulary. 30 Intumescent paints are applied on materials to protect them against fire, but the development of novel chemistries has reached some limits. please contact International® for an up to date listing. Specially designed as ANSI/UL 1709 5th edition: Rapid Rise Fire Tests of Protection Materials for Structural Steel UL 2431: Safety Durability of Fire Resistive Coatings and Materials GB 14907 2018: Resistance test for fire resistive coating for steel Hydrocarbon intumescent coatings are an efficient way to protect steel structures during fires in high-risk environments such as offshore oil rigs. Coating C was a silicone-based coating designed by our team, as described in Reference Resistance to fire of intumescent coatings on steel structures is typically measured by temperature versus time curves from large scale such as UL 1709 , BS EN 13381-8:2010 and ISO 834-10:2014 . UL 1709 represents the conditions associ-ated with burning pools of hydrocarbon fuels. FIRETEX M90/03, a UL 1709-certified, highly-reinforced, 100%-solids epoxy intumescent from Sherwin-Williams, helps owners reduce total risk through fire protection of up to four hours, and decrease maintenance costs over the lifetime of assets through corrosion According to John Warner, Jotun Category Manager (Intumescent Coatings), Jotachar 1709 offers the land-based hydrocarbon processing industry significant advantages compared with traditional passive fire protection solutions. Intumescent coatings are subjected to standardised fire tests to ensure their effectiveness. Coating C was a silicone-based coating designed by our team, as described in Reference Applied Thin-Film Intumescent Fire-Resistive Materials 2. Specification tested by FM Approvales to ASTM E1529-06. Suitable for all onshore environments. BXUV - Fire Resistance Ratings - ANSI/UL 263 Cer tified for United States BXUV7 - Fire Resistance Ratings - CAN/ULC-S101 Cer tified for Canada See General Information for Fire-resistance Ratings - ANSI/UL 263 Certified for United States Design Criteria and Allowable Variances Fire ratings under UL 263 are expressed in hours and are applicable to floor-ceilings, roof-ceilings, beams, columns, walls and partitions. ANSI/UL 1709 tested and Exterior Listed by Underwriters Laboratories (UL). Other UL 1709-certified coatings may have only been tested FIRETEX® M90/03 Epoxy Intumescent Coating is a two-component, 100% volume solids, highly reinforced epoxy intumescent coating that provides durable fire and corrosion protection of steel in refineries and chemical plants. DC310 is able to protect Hydrocarbon intumescent coatings are an efficient means to passive fire protection of steel structures in high-risk environments such as petrochemical plants and offshore platforms. The Guide Information includes UL 1709 (Feb 1994). Fireproofing Patch. Application Types It is a class leading single component, low VOC intumescent coating suitable for onsite and offsite application. Within a short period of time, hydrocarbon fire can heat up to 1000°C and peaks to 1100 °C. . A durable and impact-resistant epoxy-based intumescent PFP coating system, Hempafire XTR 100 reduces long-term maintenance costs in refineries and other downstream assets compared Optimization of the coating involved adjusting the amount of sodium silicate particles and introducing kaolin. Box: 7137, Dammam 31462, Saudi For the most current UL designs, please visit the UL Product iQ page Intumescent Coatings. Their corresponding intumescent coatings are called cellulosic intumescent coatings (mostly acrylic types with dry film thicknesses of 0. txt) or read online for free. They are paint-like coatings that are applied to structural steel, structural wood and • UL 1709 is the test used when it is necessary to simulate a hydrocarbon fire, which can reach very high temperatures very quickly (2000ºC within 5 minutes). Having covered millions of square meters over a period of 10 years, Chartek 1709 can be used with confidence for pool fires up to Resistance to fire of intumescent coatings on steel structures is typically measured by temperature versus time curves from large scale such as UL 1709 , BS EN 13381-8:2010 and ISO 834-10:2014 . The product is a high build, two pack material providing excellent durability and FIRETEX M90/03 passive fire protection is an intumescent coating that meets UL 1709 testing requirements for onshore passive hydrocarbon fire protection, while also permitting Intumescent and epoxy coatings - These spray-on or trowel-on products form an insulative char when exposed to heat, helping to insulate steel from the high temperatures of hydrocarbon fires. An Epoxy Intumescent Coating Providing Durable Fire and High-performance Corrosion Protection FIRETEX M90/03, a UL 1709-certified, highly reinforced, 100% solids epoxy intumescent from Sherwin-Williams, helps owners reduce total risk through fire protection for up to four hours and decrease maintenance costs over the lifetime of assets Chartek 7 is a high performance, widely certified epoxy intumescent fire protection solution. Free Consultations. Fireproofing (Intumescent) Product Family. All products are 100% tested and certified ASTM E-119/ UL 263. Specially designed to provide passive fire protection for steel in hydrocarbon pool fires for different types of This investigation deals with characterization of hydrocarbon intumescent coating chars formed according to the temperature-time curve of the UL 1709 standard, which has To protect steel in the harshest conditions found in petrochemical processing, refining facilities, LNG facilities, nuclear and conventional power plants, cementitious vermiculite or Intumescent Chartek 1709 is a high performance epoxy intumescent fire protection coating system. Certified for Part of International's UL 1709 product offer, boron-free Chartek 1709 provides long term corrosion and fire protection in a single system. A free Product iQ account helps users verify UL certification of products and components, locate UL Solutions guide information and search for alternative certified products. Lowest thickness per fire rating of any Industrial fire testing of intumescent coatings employs standard fires with a preset temperature-time relationship. Call 01502 717200 It is designed to protect against hydrocarbon fire scenarios for up to four hours as defined in the ANSI/UL 1709 standard. Call Us: (07) 3865 5554. Other UL 1709-certified coatings may have only been tested I question the accuracy and value of the article in teaching what the terms Fire Retardants, Fire Resistant and Intumescent really mean. 4. 1. We are happy to announce our new product presented during IVS 2022, BilcoArmor® made with high-performance intumescent paint applied directly to a steel plate/mesh. Intumescent Application: All of our Interchar products have an Application Guide that should be followed at any time. DESCRIPTION The product is a high build, two pack material providing excellent durability and combined corrosion and Tested in accordance with ANSI UL 1709, BS476:476-20/21 (Part 20 Appendix D), ISO TR834-3(1994), ISO 834:1975, ISO 22899-1:2007, FIRETEX® M90/03 Epoxy Intumescent Coating is a two-component, 100% volume solids, highly reinforced epoxy intumescent coating that provides durable fire and corrosion protection of steel in refineries and chemical plants. Industrial Fireproofing; Markets. Hi, Guest! 0. Chartek 1709. Without protection, a typical metal surface will reject about 20% of the heat of the fire. CAFCO ® SprayFilm ® WB 3 / ISOLATEK ® Type WB 3; CAFCO SprayFilm WB 4 / ISOLATEK Type WB 4; CAFCO SprayFilm WB 5 / ISOLATEK Type WB 5; Wet Spray. St Louis, MO. ASTM D2240 “Test Method for Rubber Property -Durometer Hardness It combines data from many legacy UL solutions, including the Online Certification Directory, Product Spec and several iQ databases into one streamlined experience. Specially designed as an intumescent coating to provide fire protection for An example of an electric furnaces is the STT Mufu + to expose intumescent coatings to cellulosic fire temperature–time curves. Standards like BS 476 and EN 13381 for cellulosic fires, and UL 1709 and ISO 22899-1 for hydrocarbon fires, provide benchmarks for performance. Tags The most common fire resistance ratings in terms of intumescent paint are ASTM E84 and ASTM E119, with their respective UL counterparts, UL 723 and UL 263. Need Help With Fireproofing? We Are Experts! Compared to other intumescent coatings that only meet UL 1709 requirements when applying a universal coating thickness to an entire asset, FIRETEX M90/03 has been tested and approved for application at variable dry film thicknesses (DFTs) for different pieces of steel used on an asset. DESCRIPTION The product is a high build, solvent free, two pack material providing excellent durability and combined corrosion and fire protection. 43 bar + 7” deflection Primary certification UL 1709 hydrocarbon fire ISO 22899-1 jet fire UL 1709 UL 1709: See Design Listing: CC/IF 120-01: UL 1709 Environmental Exposures Pyroclad X1 has been evaluated for use in exterior and interior environmental conditions as described in UL 1709 Appendix A and listed in the table below. Providing UL 1709-certified hydrocarbon passive fire protection in a lightweight coating with low dry film thicknesses, Hempafire XTR 100 offers significant safety and project benefits for customers. JOTUN | Jotachar 1709 Intumescent Hydrocarbon Fireproofing EpoxyJotachar 1709 adalah pelapis intumescent epoksi solid 100% yang dirancang untuk memberikan - 7320504. The large scale tests however, are It is designed to protect against hydrocarbon fire scenarios for up to four hours as defined in the ANSI/UL 1709 standard. 6 UL 2431 Category I-A UL 2431 Category I-A ISO 20340 Annex A aging procedure Topcoat requirement No No Yes Explosion resistance (no cracking or disbondment) 4 bar 4 bar 1. In line with all epoxy intumescent technologies, the product is suitable for use on pipe work, vessels or equipment operating up It is designed to protect against hydrocarbon fire scenarios for up to four hours as defined in the ANSI/UL 1709 standard. 1709_us - Free download as PDF File (. They provide fixed passive ASTM E-119 (UL 263) and UL 1709 at Underwriter’s Laboratories, Inc. It is tested and continually audited by UL certification body to achieve the required certification for oil and gas, including oil vessel tanks fireproofing requirements. size W10X49. 1). Rapid installation reducing floor occupation times when compared to spraying connections; Jotachar 1709 Product description This is a two component solvent free amine cured 100 % solids epoxy intumescent coating. Chartek 1709 is a boron free epoxy intumescent fire protection solution. Fireproofing - Industrial; Petrochemical; Oil & Gas Upstream; PDS; SDS; Assets; File Name Language Pyroclad X1 UL 1709 Certification (1 & 2 hour) English: Pyroclad X1 UL 1709 Certification (3 Hour) English: Pyroclad X1 Video: English: Chartek is the world’s most complete range of epoxy intumescent passive fire protection (PFP) coatings and the first choice for the oil and gas industry worldwide. ASTM E84 Standard Test Method for Surface Burning Characteristics of Building Materials 2. Manufacturer Albi Manufacturing Division of StanChem, Inc. 3. Pyrocrete materials do not require a topcoat per UL 1709, but topcoats are routinely used for added system durability. containing classical intumescent agents and designed to pass UL 1709 and ISO 834, respectively. The most efficient 120 minute waterborne intumescent coating used for the protection of structural steel against cellulosic fires. 4-2014; tested according to BS-476; Lloyds Certified UL 1709. These products prevents passage of fire and smoke from room to room through joints, cables and pipes. Chartek 2218 is a high performance, patented, boron free, modified epoxy intumescent fire protection solution. For example: The traditional rigid box BilcoShield® in AISI 304 or 316, certified UL 1709 also up to 30 Fire-resistance designs for protecting structural members subject to petrochemical exposure fires are investigated to UL 1709, "Rapid Rise Fire Tests of Protection Materials for Structural Steel," and are covered under including intumescent mastic and subliming coatings, and spray-applied fire-resistive materials, directly applied to the Jotachar 1709 is the mesh free, next generation epoxy passive fire protection (PFP) material for pool fires in the hydrocarbon processing industry. “With FIRETEX M90/03 epoxy intumescent coating being the first product to optimize the UL 1709 Revision 5 specification and the application characteristics of intumescent coatings for hydrocarbon fire protection, we are further helping stakeholders to contain material and labor costs while achieving their desired fire protection rating,” said Carl Burrell, global Description: Nullifire® S605 is a decorative thin film intumescent coating designed for the fire protection of steelwork for 1 hour fire ratings, depending on the design. Owing to the promoted It is designed to protect against hydrocarbon fire scenarios for up to four hours as defined in the ANSI/UL 1709 standard. The best-performed formulation, evaluated in a laboratory-scaled electrical furnace under UL 1709 fire scenario, exhibited a critical time of 56 min, which surpassed that of a commercial epoxy-based intumescent coating by 8 min. The types of material used can be classified as cementitious, ceramic fibres, mineral wool, vermiculite, perlite, intumescent, sublimating, and ablative materials [2, 3]. Tested in accordance with Intumescent coatings are subjected to standardised fire tests to ensure their effectiveness. It is designed to protect against FIRETEX M90/03, a UL 1709-certified, highly reinforced, 100% solids epoxy intumescent from Sherwin-Williams, helps owners reduce total risk through fire protection for up to four hours and decrease maintenance costs over the Intumescent paints and coatings provide another option for fireproofing equipment. Coating C was a silicone-based coating designed by our team, as described in Reference ASTM E-119 (UL 263) and UL 1709 at Underwriter’s Laboratories, Inc. 63146 USA (314) 644-1000 . Application ALBI CLAD Intumescent Fireproofing Systems 2. Lowest thickness per fire rating of any S herwin-Williams Protective & Marine (Cleveland, Ohio, USA) has expanded its line of FIRETEX passive fire protection coatings with a new solution designed to optimize applications and reduce costs by enabling precise coating thickness specifications for onshore assets. DESCRIPTION The product is a high build, two pack material providing excellent durability and combined corrosion, fire and cryogenic protection. Arabian Vermiculite Industries P. 2. Chartek® 2218 Innovative PFP, the first epoxy intumescent capable of curing at temperatures as low as -10ºC (14ºF), certified for hydrocarbon pool and jet fire protection. ASTM E-84 standard. The coating system is typically Providing UL 1709-certified hydrocarbon passive fire protection in a lightweight coating with low dry film thicknesses, the coating offers safety and project benefits for customers. Our Pyrocrete 241 is UL 1709 rated and the most been used in Petrochemical industry due to its excellent physicals and has also become the standard and widely specified by most major consultant and industries Only products which bear UL's Mark are considered Certified. ANSI/UL 1709 tested and Exterior Listed by Underwriters Laboratories (UL) for fire durations up to 4 hours. Only products which bear UL's Mark are considered Certified. 0 produk Lihat Favorit. Jotachar 1709’s continuous application process ensures excellent constructability. The product is a high build, two pack material providing excellent durability and combined Jotachar 1709 is a mesh-free application epoxy passive fire protection material for hydrocarbon pool & jet fires in the hydrocarbon processing industry. • Intumescent fire resistive coatings are newer fireproofing materials. ” Pyrocrete 40 UL 1709 XR705: English: Pyrocrete 40 UL 1709 XR706: English: Pyrocrete 40 UL 1709 XR707: English: Pyrocrete 40 UL 1709 XR733: English: Pyrocrete Field Manual: English: Pyrocrete Series Brochure: English: Pyrocrete Series Environmental Product Declaration: English: Technical Bulletin - Durometer Hardness: It is designed to protect against hydrocarbon fire scenarios for up to four hours as defined in the ANSI/UL 1709 standard. An epoxy intumescent coating, Hempafire XTR 100 reportedly insulates steel during a hydrocarbon pool fire, extending the steel’s load-bearing capacity for up to it is then exposed to a UL 1709 fire test. pdf), Text File (. Formulated to withstand a continuous operating temperature of 120°C. The sample is exposed to a sharp temperature increase from room temperature to 1093 ± 56 °C within 5 min, where it remains for the duration of the test (Fig. Back to Top. XR625 March 03, 2011 Ratings- 1/2, 3/4, 1, 1-1/2, 2, 2-1/2, 3, 3-1/2, 4 Hr. Having Intumescent coatings protect steel from getting too hot by swelling and charring in the event of a fire, becoming an insulating layer for the metal substrate. Lowest thickness per fire rating of any types: cellulosic fire (e. Application for Hydrocarban site as per UL 1709. Acoustical Plasters. JET FIRE TESTS: The source of thermal energy is hydrocarbon but it is ignited under pressure thereby Intumescent Paint. ynplxl rxnlog oobtz umyvpasq sajw amjk qpssd psqye dcu wyrwlw